Restore Factory Programming Defaults - IntelliSense SECURIT 900C Installation Manual

Hide thumbs Also See for SECURIT 900C:
Table of Contents

Advertisement

RESTORE
FACTORY
DEFAULTS
RESTORE
CODE
DEFAULTS
SOFTWARE
VERSION
ADVANCED
COMMS
TECHNISTORE
VERSION
CONFIRMED
ALARM TIME
WINDOW
ENGINEER
AND USER
CODE CHANGE
RESTORE FACTORY PROGRAMMING DEFAULTS MENU 98
Enter 98-1 twice within 5 seconds.
RESTORE CODE DEFAULTS
To restore the engineer and master user code, disconnect the battery
and remove mains power. Re-apply power and within 5 seconds hold
the * and # keys down together until two beeps are heard. The engineer
code will be restored to 9090 and the master code to 1234. All other
user codes will remain unchanged.
SOFTWARE VERSION MENU 99
Entering 99-1 will display the software version. A sequence of three LEDs
will light on the keypad indicating the version number.
ADVANCED COMMUNICATIONS
TECHNISTORE VERSION MENU 01
Enter 01 then enter the Technistore three digit version number given by
the Central Station (Alarm Receiving Centre, ARC). This defaults to
000.
CONFIRMED ALARM TIME WINDOW MENU 02
Enter 02-(o). Enter 0 - 2 followed by the key corresponding to the
Option Number required from the table below:
Enter 0
Enter 1
Enter 2
Enter 3
ENGINEER AND USER CODE CHANGE
The system has 8 user codes. The default codes are
Engineer code
To change the Engineer code, enter your existing code then press 8 0,
followed by your new 4-digit code the keypad will give two beeps.
If the panel does not accept your code then there may be a conflict with
another user code. The panel will abort the code change and retain the
old code. Three beeps will be heard from the keypad. Try again with a
different code.
The other users are changed in the same way using existing code, 8
user number, new code.
Code access levels and numbers
• User 0 is the Engineer
• User 1 is the Master user and can alter all user codes
• Other Users 2 - 7 can only alter their own code
• All codes have the same access authority
• Code 8 is reserved for Duress
45 minutes (Default)
10 minutes
20 minutes
30 minutes
9090
User 1 code 1234.
20

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for IntelliSense SECURIT 900C

Table of Contents