Low Battery & Mains Loss - IntelliSense SECURIT 900C Installation Manual

LOW BATTERY
& MAINS LOSS
PERIODIC TEST
REPORT
ISOLATE
INVERT OPEN /
CLOSE REPORT
DOUBLE
KNOCK ZONE
ISOLATION
ALLOWED
COMMUNICATE
COMMUNICATE
RESTORE
RESTORE
COMMUNICATE LOW BATTERY & MAINS LOSS MENU 88
Enter 88-(o). Enter 8 - 8 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
COMMUNICATE PERIODIC TEST REPORT MENU 89
Enter 89-(o). Enter 8 - 9 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
Enter 2
Enter 3
COMMUNICATE ISOLATE MENU 91
Enter 91-(o). Enter 9 - 1 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
INVERT OPEN / CLOSE REPORT MENU 92
Enter 92-(o). Enter 9 - 2 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
DOUBLE KNOCK ZONE MENU 93
Enter 93-(z). Enter 9 - 3 followed by the key corresponding to the Zone
Number required. Only one zone may be selected as double knock.
Enter 0
Enter 1-8
This option allows one zone to be programmed as a Double Knock zone.
The control panel will only acknowledge the Double Knock zone if it is
activated twice within five minutes, or once for more than ten seconds
continuous activation.
ISOLATION ALLOWED MENU 94
Enter 94-(o). Enter 9 - 4 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
COMMUNICATE RESTORE MENU 95
Enter 95-(o). Enter 9 - 5 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
No (Default)
Yes
No (Default)
Every 24 hrs
Every 7 days
Every 31 days
No (Default)
Yes
No (Default)
Yes
None selected (Default)
Zone selected
No
Yes (Default)
At unset
At reset (Default)
18