Bell Output Polarity; Alarm Output Polarity; Tamper Alarm Reset - IntelliSense SECURIT 900C Installation Manual

BELL OUTPUT
POLARITY
ALARM OUTPUT
POLARITY
TAMPER
ALARM RESET
COMMS
ZONE MODE
PRIMARY
TELEPHONE
NUMBER
SECONDARY
TELEPHONE
NUMBER
ACCOUNT
NUMBER
USER CODE 8
DURESS
ALARM
BELL OUTPUT POLARITY MENU 56
Enter 56-(o). Enter 5 - 6 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
ALARM OUTPUT POLARITY MENU 57
Enter 57-(o). Enter 5 - 7 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
TAMPER ALARM RESET MENU 58
Enter 58-(o). Enter 5 - 8 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
Enter 2
Enter 3
ZONE MODE MENU 59
Enter 59-(o). Enter 5 - 9 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
Enter 2
COMMUNICATIONS
PRIMARY TELEPHONE NUMBER MENU 61
Enter 61 followed by the telephone number. Up to 20 digits are allowed.
End entry by pressing *. Enter # at any position to give a 2 second
pause.
SECONDARY TELEPHONE NUMBER MENU 62
Enter 62 followed by the telephone number. Up to 20 digits are allowed.
End entry by pressing *. Enter # at any position to give a 2 second
pause.
ACCOUNT NUMBER MENU 63
Enter 63 followed by the account number. The entry must be between 4
and 6 digits. End entry by pressing *.
USER CODE 8 DURESS ALARM MENU 64
Enter 64-(o). Enter 6 - 4 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
Negative applied (Default)
Negative removed
Negative applied (Default)
Negative removed
Customer (Default)
Engineer
Technistore
Technistore & Engineer
Normally closed loops (Default)
Double balanced EOL
Single EOL
Off (Default)
On
14