Table of Contents
Advertisement
PROGRAMMING
CONVENTIONS
REVIEWING
PROGRAMMING
ZONE
PROGRAMMING
FULL SET
PART SET
PROGRAMMING CONVENTIONS
The following conventions are used in the Menu tables:
(z)
Zone Number
(o)
Option Number
Two bleeps will follow a successful data entry.
The currently programmed setting in menu options can easily be
reviewed. With the exception of menu 6, enter the first menu number
followed by 00. The display will sequence through the current setting
for each option selected in the group eg. to view night set zones enter 3
0 0. The display will step through the setting starting at zone 1 and
ending with zone 8. A bleep will be heard each time the display steps.
To review menu 6 (the communications options) enter 6 0 followed by
the sub option number. eg. to review the primary telephone number
enter 6 0 1. The display will step through each digit of the programmed
number. A bleep will be heard each time the display steps. The
display will show numbers 1 through 8, with 'day' corresponding to 0
and 'Tamper' corresponding to 9.
ZONE PROGRAMMING
Any zone may have independent options programmed for Full, Part &
Night set.
FULL SET ZONE PROGRAMMING MENU 1
Enter 1-(z)-(o). Enter 1 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
Enter 2
Enter 3
Enter 4
Enter 5
Enter 6
Enter 7
Enter 8
Enter 9
PART SET ZONE PROGRAMMING MENU 2
Enter 2-(z)-(o). Enter 2 followed by the key corresponding to the Option
Number required from the table below:
Enter 0
Enter 1
Enter 2
Enter 3
Enter 4
Enter 5
Enter 6
Enter 7
Enter 8
Enter 9
– enter key for required zone number.
– enter key for required option number.
Not Used
Final Exit
Keyswitch
Full Alarm
Walkthrough
Tamper (24 hr)
Silent PA
Audible PA
Exit Terminator
Fire
Not Used
Final Exit
Keyswitch
Full Alarm
Walkthrough
Tamper (24 hr)
Silent PA
Audible PA
Exit Terminator
Fire
10
Hide quick links:
Advertisement
Table of Contents
