Installation Test - Vetta V30 Owner's Manual

INSTALLATION TEST

Once you have finished with the installation procedure, you are ready to test the unit to make sure that it works.
STEP 1
Make sure that the computer head is locked firmly into the mounting bracket.
STEP 2
Pick up the front of the bicycle and spin the front wheel. The computer should register speed within 1-2
seconds. If you do not get a speed reading, check to be sure that the magnet and sensor alignment is
correct and that the space between the magnet and sensor is 1-2mm or less. If this does not solve the
problem, talk to your Authorized Vetta Retailer. In the United States Vetta customers can call our service
hotline at 1.800.GO.VETTA.