Warnings And Cautions - Vetta V30 Owner's Manual

WARNINGS AND CAUTIONS

CAUTION Vetta encourages you to ride safely. Wear a helmet every time you ride, use front and rear lights
at night, and always keep your eyes on the road ahead of you.
CAUTION
Vetta cycle computers are sophisticated electronic instruments. Vetta recommends that this
product be installed only by a qualified bicycle retailer. Failure to read these instructions and improper
installation of this device may void the warranty. If you are in doubt about any aspect of the installation or
operation of this product, consult your local bicycle retailer for clarification.
PROGRAMMING THE COMPUTER HEAD
Now that you are familiar with the functions and features of your Vetta V-30 cycle computer, you are ready to
begin programming the unit specifically for your bike. Take a few minutes to familiarize yourself with the unit
and its operation before you proceed to program the unit.
IMPORTANT: When you program the V-30 unit, it will automatically advance through the programming
functions as each number or increment is selected. To advance the numbers in a function setting, put the
magnet directly on the sensor. This will advance the digits or units you are trying to "set". To select the
number that you desire, remove the magnet from the sensor while that number or unit is displayed.