golmar Stadio Plus 4113/AL Instruction Manual page 6

ACCESS CONTROL PROGRAMMING
Coming from previous page
It defines the 7th activation code of the relay n.1.
1 7
It defines the 8th activation code of the relay n.1.
1 8
It defines the 1st activation code of the relay n.2.
2 1
It defines the 2nd activation code of the relay n.2.
2 2
It defines the 3rd activation code of the relay n.2.
2 3
It defines the 4th activation code of the relay n.2.
2 4
It defines the 5th activation code of the relay n.2.
2 5
It defines the 6th activation code of the relay n.2.
2 6
It defines the 7th activation code of the relay n.2.
2 7
It defines the 8th activation code of the relay n.2.
2 8
F
unction fields and values.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Proceed as detailed on 11 field.
Continue
8 9
Coming from previous page
3 0
4 1
0
or
5 1
0
or
6 1
0
6 2
0
6 3
0
ACCES CONTROL PROGRAMMING
F
unction fields and values.
It defines the activation code of the panic function.
Proceed as detailed on 11 field.
It defines the contact type of the relay n.1.
Select 0 for normally open operation.
Select 1 for normally closed operation.
In case of power supply failure and n/c operation,
the relay will switch to n/o status.
1
Factory default: 0 (n/o).
It defines the activation type of the relay n.1.
Select 0 for single shoot operation.
Select 1 for stable operation.
Factory default: 0 (single shoot).
1
It defines the activation time of the relay n.1.
Only valid when programmed as single shoot.
Select a value from 01 to 20 (seconds).
Factory default: 03 seconds.
5
It defines the activation time of the relay n.2.
This relay only operates as single shoot.
Select a value from 01 to 20 (seconds).
Factory default: 03 seconds.
5
It defines the activation time of the panic output.
Select a value from 01 to 20 (seconds).
Factory default: 03 seconds.
5
Continue