Operation - Beurer LW 110 Instructions For Use Manual

Hide thumbs Also See for LW 110:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
• Add 5 drops of the "Beurer AquaFresh" water additive for each litre of filled water in order to prevent the
formation of algae, bacteria and fungus in the water. Alternatively and to best prevent bacteria building up,
up to 10 ml of Beurer AquaFresh can be poured in after the fortnightly cleaning of the tub and humidifica-
tion discs.
• Place the upper cover with integrated fan unit on the tub. If the upper cover cannot be placed precisely
onto the tub, turn the upper cover around by 180 degrees. This is a design feature and ensures that the
fill level sensor contacts touch each other. Never use force to place the upper cover on the tub. Otherwise
the device will be damaged.
Important
• Do not add any essential oils or fragrances. If other additives are used, the plastic material may
become discoloured and damaged.
• E nsure the water level in the tub with inserted humidification discs never exceeds the lower edge
of the "MAX" marking on the inside of the tub.
Tip:
The addition of a small volume of conventional washing-up liquid (e.g. 1 drop) breaks the water
surface tension and increases evaporation output.
Positioning the device
• Position the air washer in the vicinity of a heater to improve evaporation, in particular in large rooms
(do not exceed a max. temperature of 50 °C). Always ensure that the air inlet and air outlet remain clear
and that the air flows freely.
• Insert the mains plug into the socket. Ensure that the cable does not pose a trip hazard. You can clamp
the mains cable in the vertical ridge on the rear of the tub and lead it downwards.

6. Operation

Switch on the device using the "On/off" button
shows fan level 0 and the water fill level.
Select the fan speed using the fan button in the centre of the upper side.
Graphic displayed
The water level gauge indicates the tub fill level:
Graphic displayed
Fan level
Level 0, standby – fan off
Level 1, low
Level 2, medium
Level 3, maximum
Fill level
approx. 4.3 l to 7.25 l
Approx. 2.5 l to 4.3 l
Approx. 0.5 l to 2.5 l
in the centre of the upper cover. The display lights up,
14

Advertisement

Table of Contents
loading

Table of Contents