Check Of Clutch Case, Roller Bearing And Internal Centre Bearing - Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual

clUTcH cASE:
A. Teeth meshing with main gear;
B. Teeth meshing with kickstart idler gear;
c. Teeth meshing with driving discs;
D. External washer.
d
3.8.3 Check of clutch case,
roller bearing and
internal centre bearing
Before reassembling the clutch case, make sure
that the sides of the teeth A, dedicated to main
transmission and B, dedicated to meshing with
the kickstart idler gear and oil pumps, have no
superficial nicks or abnormal wear.
Also closely check that the teeth C, upon which
the driving discs engage, are not chipped or
deeply cut.
Check the external surface D does not show trac-
es of meshing or abnormal wear.
If any damage is found, have the piece replaced.
C
B
A
3
67