Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 10

1
10
8
∙ Disconnect the water hoses from the engine
and from the right radiator.
∙ Disconnect the electrical connectors for the
right radiator accessories.
∙ Remove the right radiator.
∙ Remove the left radiator with pipes.
∙ Disconnect the coil from the spark plug, re-
move the two screws 10 and take the com-
plete coil support out of the intake manifold.
Note: when the coil support has been taken
down, we recommend putting the screws
back in place, without tightening them.