Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 91

coupling of cylinder to piston and crankcase-
Fastening of cylinder nuts.
Apply the gasket between crankcase and cylin-
der.
Accurately oil the entire cylinder using engine oil
and insert the piston in the cylinder. The piston
must be inserted in the cylinder fastening the
elastic bands between the fingers. The cylinder
must be positioned so that the outlet port is fac-
ing the front of the engine.
Push the cylinder towards the base.
Apply the four collar nuts and fasten them at
30Nm, following the criss-cross pattern.
30Nm
3
89