Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 99

Exploded view of flywheel. 4) Nut M12x; 5) Elastic washer;
8) Woodruff key; 9) Flywheel.
A
Flywheel fastening.
coupling of stator to flywheel cover.
B
Application of stator plate.
60Nm
10Nm
10
11
Degrease the conical segment of the crankshaft,
apply the Woodruff key 8 in the appropriate
groove on the crankshaft, couple the flywheel 9,
the elastic rose-petal 5 and the nut 4, after having
applied the thread with medium strength thread-
locker.
Fasten the nut to torque 60Nm, keeping the
flywheel blocked with special tool A (code
026140040 000).
Couple the stator to the flywheel cover by means
of the two screws 10. Apply the threading with
medium strength threadlocker and tighten them
at a torque of 10Nm.
Insert the cable gland in its specific seat and
check its perfect sealing.
Apply a few drops of silicone in the guides for
housing the plate 1. Appliy the plate 11 to be in-
serted in its guides and pressed. When coupling
it to the left crankcase half, apply a drop of gas-
ket paste (code 3625000000) in area B.
3
97