Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 110

4
25Nm
10Nm
10Nm
108
7
8
9
∙ Apply the exhaust expansion by first as-
sembling the front springs and then apply-
ing the two fixing screws.
∙ Apply the spacer and fasten the two fixing
screws at 10Nm. Fasten the expansion fix-
ing screws to the frame at 10Nm.
∙ Apply the Kickstart lever (optional). Apply
the medium-resistance sealant threading
on the screw and fasten at 25Nm. Apply
the brake pedal return spring 7.
∙ Insert the pinion in the chain and fasten
it onto the gearbox outlet shaft. Assemble
the relative circlip 8 checking its in its seat.
∙ Apply the pinion guard 9 and frame side
guards 10 and 11. Fasten the screws at
10Nm and apply the fixing straps between
the side guards and frame.