Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 108

4
106
• Apply the start motor cable and fasten the
10Nm
• Connect the ventilation pipes to the engine
• Apply the left radiator to the frame. Apply the
• Apply the right radiator, the respective screws
• Connect the electrical accessories of the right
nut at 10 Nm. Cover the connection using
the specific protective cap.
screws and fasten at 10Nm. Apply the pro-
tective grid.
to be tightened to 10Nm. Apply the protec-
tive grid.
radiator to the electrical system.