Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 106

4
6
8
104
7
10Nm
∙ Assicuratisi che il manicotto cassa filtro sia
correttamente inserito nel carburatore, ser-
rare le due fascette lato cassa filtro e lato
collettore.Make sure the filter box sleeve is
correctly inserted inside the carburetor, fas-
ten the two filter box side and manifold side
straps.
∙ Remove the cap applied to the mixer tube
(see page 10).
∙ Slide the tube through the tube hole 6 and
connect it to the nozzle 7 on the intake mani-
fold.
ATTENTION! Ensure that the tube is fitted all the
way onto the nozzle.
∙ Apply the complete coil unit to the intake
manifold and tighten the screws 8 at 10Nm.