Beta Motorcycles X Trainer 300 2T 2015 Workshop Manual page 63

Exploded view of gearshift.
5) Thrust washer 14x30x1;
6) Gearshift return spring;
7) Spring guide;
8) pawl return spring;
9) Movable pawl;
10) Gearshift shaft.
Gearshift drive shaft: note the gearshift return spring
position.
For reassembly, couple the movable pawl 9 to
the drive shaft 10 and, while compressing it, in-
sert the spring 8 between the movable pawl and
the drive shaft. The apply the spring guide 7, the
gearshift return spring 6 and finally the 14x30x1
thrust washer 5 (14x30x1).
The gearshift return spring must be positioned
as in the figure to be able to carry out its func-
tion.
3
61