Table of Contents
Advertisement
If the gas logs have been factory installed they should
not need to be positioned.
If the logs have been packaged separately, refer to the
installation instructions that accompany the logs.
If sooting occurs, the logs might need to be
repositioned slightly to avoid excessive flame
impingement.
Two separate bags of ember material are shipped with
this gas fireplace:
• The bag labeled Golden Ember (GE-93) is flame
colorant material.
• The bag labeled Glowing Ember (050-721) is
standard glowing ember material.
To place the ember material:
• Remove the top louver by lifting it up and away from
the unit.
• Unlatch the latches at the top and bottom of the
glass door.
• Remove the glass door from the unit.
• Cover the top of the burner with a single layer of
ember material. Then sprinkle GE-93 on top of the
burner.
• Save the remaining ember materials for use during
fireplace servicing.
• Reinstall and latch the glass door and top louver on
the unit (see Replacement Parts Section of the
manual.)
46
Hide quick links:
Advertisement
Table of Contents
