Mitsubishi OUTLANDER Manual page 530

To play from an iPod
1. Press the PWR button (3) to turn on the audio system. The
system turns on in the last mode used.
2. Connect your iPod to the USB input terminal.
Refer to "How to connect an iPod" on page 3-267.
3. Press the CD button (2) several times to switch to the iPod
mode. The input mode changes every time the CD button
is pressed.
CD mode → iPod mode → Bluetooth
equipped) → Rear-seat display mode (if so equipped)
NOTE
If your vehicle is equipped with audio/video input RCA
terminals, pressing and holding the CD button for 2 sec-
onds or more switches the system to the AUX mode.
4. Once the device is selected, playback starts and "i"
appears on the display.
NOTE
Depending on the condition of your iPod, it may take a
longer time before the playback starts.
5. To stop the playback, press the RADIO button (1) or CD
button (2) to switch to a different mode.
N00762400058
NOTE
Buttons on the iPod are disabled while the iPod is con-
nected to the audio system.
To adjust the volume and tone, refer to "To adjust the vol-
ume" on page 5-48, 5-68 and "To adjust the tone" on page
5-48, 5-68.
To fast-forward/reverse the track
®
mode (if so
To fast-forward/reverse the current track, press the
(9) or
Fast-forward
To fast-forward the current track, press the
While the button is pressed, the track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the
the button is pressed, the track will be fast-reversed.
button (8).
Comfort controls
N00762500017
button
button (9).
5
button (8). While
5-99