Mitsubishi OUTLANDER Manual page 293

Features and controls
NOTE
When the momentary fuel consumption cannot be mea-
sured, a bar graph is not shown.
The display setting can be changed to the preferred units
{mpg(US), mpg(UK), L/100km or km/L}.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
It is possible to cancel the green bar graph.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
Function setting screen
The "Display language", "Temperature unit", "Fuel consump-
3
tion unit", and "Average fuel consumption and speed reset
method" settings can be modified as desired.
For further details, refer to "Changing the function settings
(With ignition switch in the "ON" position)" on page 3-184.
3-178
Interrupt display screen (With ignition switch in
the "ON" position)
Warning display
When there is information to be announced, such as a system
fault, a tone sounds and the information screen is switched to
the warning display screen.
Refer to the warning list and take the necessary measures.
Refer to "Warning display list (With ignition switch in the
"ON" position)" on page 3-203.
When the cause of the warning display is eliminated, the warn-
ing display goes out automatically.
Returning to the display screen from before the warning
display
Even if the cause of the warning display is not eliminated, you
can return to the screen that was displayed before the warning
display.
If you press the multi-information meter switch, the display
screen switches to the previous screen display (before the
warning and the "!" warning (A) were displayed).
N00556300151