Mitsubishi OUTLANDER Manual page 307

Features and controls
NOTE
If the battery is disconnected, the language cooperative
control is automatically set to "A or 1" (language coopera-
tion: enabled).
The language cooperation setting can be switched in the
following manner.
• When "A or 1" (language cooperation: enabled) has
been selected, the language for Mitsubishi Multi-Com-
munication System (if so equipped) or Bluetooth
interface (if so equipped) is automatically changed to
the language selected for the multi-information display.
• When "M, 2 or P" (language cooperation: disabled) has
been selected, the language for Mitsubishi Multi-Com-
3
munication System (if so equipped) or Bluetooth
interface (if so equipped) is not automatically changed
to match the language selected for the multi-information
display.
On vehicles equipped with the audio system, the language
on the display of the audio system is not switched even if
you select A or 1 of the language cooperation control.
Operation sound setting
You can turn off the operation sounds of the multi-information
meter switch and rheostat meter illumination button.
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
2. Lightly press the multi-information meter switch to select
" " (operation sound setting).
3-192
Type 1
®
2.0
Type 2
®
2.0
3. Press and hold the multi-information meter switch (for
N00557400146
about 2 seconds or more) to switch in sequence from ON
(operation sound on) → OFF (operation sound off) → ON
(operation sound on).
The setting is changed to the selected condition.