Mitsubishi OUTLANDER Manual page 300

CAUTION
!
For safety, stop the vehicle before operating.
While driving, even if you operate the multi-infor-
mation meter switch, the function setting screen is
not displayed.
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Type 1
Type 2
NOTE
To return the menu screen to the function setting screen,
press and hold the multi-information meter switch (for
about 2 seconds or more).
If no operations are made within about 15 seconds of the
menu screen being displayed, the display returns to the
function setting screen.
4. Select the item to change on the menu screen and change
to the desired setting. For further details on the operation
methods, refer to the following sections .
Refer to "Changing the reset mode for average fuel con-
sumption and average speed" on page 3-186.
Refer to "Changing the fuel consumption display unit" on
page 3-187.
Refer to "Changing the temperature unit" on page 3-189.
Refer to "Changing the display language" on page 3-190.
Refer to "Changing the language on Mitsubishi Multi-
Communication System or Bluetooth
match the multi-information display (if so equipped)" on
page 3-191.
Refer to "Operation sound setting" on page 3-192.
Refer to "Changing the time until "REST REMINDER" is
displayed" on page 3-193.
Refer to "Changing the turn signal sound" on page 3-194.
Refer to "Changing the momentary fuel consumption dis-
play (Type 2)" on page 3-195.
Refer to "Returning to the factory settings" on page 3-
196.
Features and controls
3
®
2.0 interface to
3-185