Mitsubishi OUTLANDER Manual page 235

Features and controls
CAUTION
!
Do not operate the dial while the tires are spinning.
The vehicle might suddenly move in an unantici-
pated direction.
Driving on dry, paved roads in "LOCK" mode will
increase fuel consumption and noise, and cause pre-
mature tire wear.
When the tires spin, especially if "LOCK" mode has
been selected and the ASC has been turned off, you
may experience strong steering feedback. Grip the
steering wheel firmly.
3
NOTE
The control mode can be changed while the vehicle is
moving.
3-120
S-AWC control mode display
Example: "TARMAC" mode is selected.
The currently selected control mode is displayed on the multi-
information display.
In addition, when the control mode is changed, the selected
mode appears on the interrupt display screen of the information
screen in the multi-information display.
The control mode display will appear on the information
screen for a few seconds, and then the original screen will
return.