Mitsubishi OUTLANDER Manual page 301

Features and controls
Changing the reset mode for average fuel consumption
and average speed
You can change the mode condition for the average fuel con-
sumption and average speed display to "Auto reset" or "Man-
ual reset."
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
2. Lightly press the multi-information meter switch to select
"AVG" (average fuel consumption and average speed set-
3
ting).
3-186
Type 1
N00557000171
Type 2
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch in sequence from A or
1 (Auto reset) → M, 2 or P (Manual reset) → A or 1 (Auto
reset).
The setting is changed to the selected reset condition.