IDEAL imax W45 Installation And Servicing Manual page 34

43 INFORMATION MODE (with code)
Press Display
I N F O
FLASHING
1. 2 1
2. 2 1
3. - 3 7
4. - 3 7
5. - 3 7
6. 8 2
7. 0 0
8. 0 0
9. 0 0
A. - 3 6
44 COMMUNICATION MODE (with code)
Press Display
C O N N
FLASHING
FLASHING
34
INSTALLATION
Description
Actual Flow Temperature T1 ºC
Actual Return Temperature T2 ºC
DHW Temperature T3 ºC
(-37 displayed if tank sensor kit not fitted)
Outside Temperature T4 ºC
(-37 displayed if outside sensor kit not fitted)
N/A
Set Flow Temperature ºC
Rate of Flow Temperature Rise ºC/s
Rate of Return Temperature Rise ºC/s
Rate of DHW Temperature Rise ºC/s
N/A
Description
In this mode the communication between the boiler control module, optional control interface
kit, and optional programmable room thermostat or modulating sequencer is shown.
No communication
There is only communication between the boiler control module and optional controls interface
kit.
There is communication between all devices.
-
Installation & Servicing