IDEAL imax W45 Installation And Servicing Manual page 28

37 STANDARD CONTROLS ACCESS CONT'D
Info Mode
i N F O
Info mode is entered from standby mode by pressing the 'mode' button twice.
Press Display
P A R A
I N F O
Press the step button until the desired information is displayed. The dot after the 1st right digit will be flashing indicating the
boiler is in 'info' mode. No settings can be changed in 'info' mode.
Press Display
Flashing
1. 2 1
2. 2 1
3. - 3 7
4. - 3 7
5. - 3 7
6. 8 2
7. 0 0
8. 0 0
9. 0 0
A. - 3 6
28
INSTALLATION
Description
Actual Flow Temperature T1 ºC
Actual Return Temperature T2 ºC
DHW Temperature T3 ºC
(-37 displayed if tank sensor kit not fitted)
OUTSIDE Temperature T4 ºC
(-37 displayed if outside sensor kit not fitted)
N/A
Set Flow Temperature ºC
Rate of Flow Temperature Rise ºC/s
Rate of Return Temperature Rise ºC/s
Rate of DHW Temperature Rise ºC/s
N/A
-
Installation & Servicing