TOHATSU M 2.5A2 Owner's Manual page 48

46
INSPECTION AND MAINTENANCE
2. Remove the oil plugs (lower and
upper), and completely drain the gear
oil into a pan.
3. Insert the oil tube nozzle into the lower
oil plug hole, and fill with gear oil by
squeezing the oil tube until oil flows out
of the upper plug hole and bubbles is
disappeared to remove the air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume:
approx. 180 mL (6.1 fl.oz) 3.5B2
approx. 90 ml (3.0 fi.oz.) 2.5A2/3.5A2
10
4. Install the upper oil plug, and then
remove oil tube nozzle and install the
lower oil plug.
ENOW00095-0
Do not reuse oil plug gasket. Always use
new gasket and tighten oil plug properly to
prevent entry of water into lower unit.
ENOF01617-0
ENOW00928-0
Wipe off gear oil well immediately if spilled
and dispose of it in accordance with local
fire prevention and environment protection
regulations.
ENON00032-0
Note
If water in the oil, giving it a milky colored
appearance. Contact your dealer.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume:
approx. 180 mL (6.1 fl.oz) 3.5B2
approx. 90 ml (3.0 fi.oz.) 2.5A2/3.5A2
ENOF01618-0
CAUTION
ENOF01618-0
CAUTION