TOHATSU M 2.5A2 Owner's Manual page 36

34
ENGINE OPERATION
position for about a minute to allow water to
drain from inside the engine.
ENOM00222-0
Tilt up
1. Close the fuel cock and tighten the air
vent screw of the tank cap.
2. Tilt up the outboard motor fully to your
side and press the tilt stopper knob
inside to set it up.
2
1
7
1. Fuel cock
2. Air vent screw
1. Tilt stopper
ENOM01304-0
Outboard motor position in tilt up
ENOW00053-0
However, the outboard motor may be set in
the wrong tilt-up position if the motor
direction is sharpy changed in course of
tilting up.
If the outboard motor is set in a wrong
position, try to tilt it up once more to set it
in the correct position.
When the outboard motor is in the tiltup
position, the tilt handle side must be in the
upward direction.
ENOF02030-A
1. Tilt handle
2. Starter handle
3. Correct
1
ENOF02031-0
1. Wrong
CAUTION
1
3
ENOF02032-0
1
ENOF02033-0
2