TOHATSU M 2.5A2 Owner's Manual page 25

ENOW00023-0
CAUTION
Operating the outboard motor without
break-in can shorten service life of the
product.
If any abnormality is experienced during
the break-in:
Discontinue the operation immediately.
Have the dealer check the product and
take proper action(s) if necessary.
ENOM01004-0
Fuel mix ratio for break-in
Gasoline 25: Genuine Engine Oil 1
25:1 when using genuine engine oil or the
recommended one (TCW3).
ENOW00940-0
CAUTION
During the break-in period, never run the
engine continuously at high speed.
After running-in is completed, select the
correct propeller so that the engine
speed is the recommended range at the
wide-opon throttle.
After completing 5 hours of breakin,
replace the gear oil with new oil. Refer to
"Changing the gear oil" in subsection (2),
Periodic Inspection.
PRE-OPERATING PREPARATIONS
ENON00008-0
Note
Proper break-in allows outboard motor to
deliver it full performance for longer service
life.
23
6