Datalogic AL5010 Product Line Manual page 71

AccuLazr™ AL5010 Product Line Manual
05-AL5010_Setup_R20.doc
To add a bar code manually:
1. To add a bar code, go to the Modify Settings > Bar Code screen.
2. Be sure you know the parameters for the symbology you are adding to
your active list.
3. Select the symbology from the Code Type drop-down list.
4. Assign a unique Code Label, if necessary.
5. Define the minimum and maximum code length.
6. Define the minimum and maximum quantity.
7. Select the Modulo Check.
8. Enter a Filter, if required.
9. Click Add. The code added will appear in the Selected Symbologies list
highlighted in yellow.
10. Click Update. 0.
To edit a bar code:
1. To edit a bar code, go to the Modify > Bar Code screen.
2. Select an option button to highlight any Symbology listed under Selected
Symbologies that you want to edit.
3. To change any of the settings (e.g. Code Label, Min/Max Length,
Min/Max Quantity, Modulo Check, Extension), click in the field and make
the required changes.
4. Click Update and then click the save icon (
To move a bar code:
5. To move a bar code, go to the Modify > Bar Code screen.
6. Select an option button to highlight any Symbology listed under Selected
Symbologies that you want to move.
7. Click Move Up to move the selected bar code toward the top (beginning)
of the list.
8. Click Move Down to move the selected bar code further back (toward
the end) of the list.
9. Any changes are highlighted in the list.
10. Click Update and then click the save icon (
NOTE: Bar code data is transmitted in the order that they
appear in the Selected Symbologies list.
To remove a bar code:
1. To remove a bar code, go to the Modify > Bar Code screen.
2. Select an option button to highlight any Symbology listed under Selected
Symbologies that you want to remove.
3. Click Remove to delete the selected bar code from the list.
4. Click Update.
0.
Setup
).
).0.
Accu-Sort Systems, Inc.
63