Table of Contents
Advertisement
The installation of this product must comply with the AS/NZS 3749.2 -1997 Standard or any
updated versions. Copies of the relative Standards are available from the Standards offices.
IMPORTANT: IF VEHICLE IS EQUIPPED WITH AIR BAG SYSTEM, for personal safety and to avoid
possible AIR BAG release it should be temporarily disabled. Please refer to the vehicle supplier for
details. Mongoose is not responsible for the accidental triggering of vehicle airbags.
a)
Read all sections of this manual so you understand how the system operates.
b)
Inspect and identify all components of the supplied equipment.
c)
The supply of installation tools or equipment is not included.
d)
Carry out a vehicle inspection report as shown in the general Mongoose installation manual
e)
Disconnect the vehicle battery & disable any airbag.
f)
If the vehicle has a security coded radio, ensure the code is available.
g)
All connections are to " FLOW SOLDERED" and insulated. The use of snap lock connectors is
not permitted. All wires are to be taped & loomed.
h)
It is recommended that the main +12v is not connected whilst wiring and soldering the other
connections to avoid misdirected electrical current or any other energy which may interfere with
the module's or vehicle's electronics.
i)
The cables supplied are black in colour with removable labels identifying the wire function. To
ensure this product conforms to the Standards, these tags are to be removed during or at the
completion of the installation.
INSTALLATION
Advertisement
Table of Contents
