Mounting; Orientation; Rigging - Chauvet COLORstrip User Manual

Mounting

Orientation

Rigging

Mounting Diagrams
COLORstrip Mounting
Diagram
COLORstrip Mini
Mounting Diagram
Page 8 of 18
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The COLORstrip/COLORstrip Mini may be mounted in any position; however, make
sure adequate ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
·
Make sure that the structure onto which you are mounting the product can support
the product's weight. See the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
·
When power linking multiple products, mount the products close enough for power
linking cables to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Safety Cable
(such as CH-05
from Chauvet)
Safety Cable
(such as CH-05
from Chauvet)
Technical Specifications
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Hanging/Mounting
Bracket
(also used as floor
support)
Bracket Adjustment
Knobs
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Bracket Adjustment
Knobs
COLORstrip/COLORstrip Mini User Manual Rev. 1
for weight information.
Hanging/Mounting
Bracket
(also used as floor
support)