Operation; Control Panel Operation; Menu Map; Dmx Linking - Chauvet COLORstrip User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

DMX Linking

Configuration
(DMX)

Starting Address

COLORstrip/COLORstrip Mini User Manual Rev. 1
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the Product Overview
Button
<MODE>
Press to back out of the current menu option
<ENTER> Press to activate a menu option or a selected value
<UP> Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
Mode Programming Steps
A001
A002
A003
A004
A005
A006
A007
A008
A009
A010
A011
ACt
A012
A013
A014
A015
A016
A017
A018
A019
A020
A021 r000–r100
A022
SdAd
SYS
The COLORstrip/COLORstrip Mini works with a DMX controller. Information about DMX is
in the CHAUVET DMX Primer, which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The COLORstrip/COLORstrip Mini uses 4 DMX channels, and the highest configurable
address is 509.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MODE> repeatedly until SYS or ACt shows on the display.
2. Press <UP> or <DOWN> repeatedly until SYS shows on the display.
3. Press <ENTER>.
4. Press <UP> or <DOWN> repeatedly until SdAd show on the display.
5. Press <ENTER>and 001–508 will show on the display.
6. Use <UP> or <DOWN> to select the starting address.
7. Press <ENTER>.
to see the button locations on the control panel.
Function
A000
F000–F100
F000–F100
F000–F100
F000–F100
F000–F100
F000–F100
F000–F100
P000–P100 F000–F100
P000–P100 F000–F100
P000–P100 F000–F100
P000–P100 F000–F100
P000–P100
P000–P100
P000–P100
P000–P100
P000–P100
P000–P100
P000–P100
P000–P100
P000–P100
G000– b000– F000–
G100 b100 F100
P000–P100
A023
001– 512
SAAd
Description
Blackout
Red (strobe)
Green (strobe)
Blue (strobe)
Yellow (strobe)
Purple (strobe)
Cyan (strobe)
White (strobe)
Color Chase 1 (speed, strobe)
Color Chase 2 (speed, strobe)
Color Chase 3 (speed, strobe)
Color Chase 4 (speed, strobe)
Color Chase 5 (speed)
Color Chase 6 (speed)
Color Chase 7 (speed)
Color Chase 8 (speed)
Color Chase 9 (speed)
Color Chase 10 (speed)
Color Chase 11 (speed)
Color Chase 12 (speed)
Color Chase 13 (speed)
Color Mix
(red, green, blue, strobe)
Color fade (speed)
All Color Chases 1–13 (speed)
DMX Address
Reset
Page 9 of 18