Advertisement
Quick Links
1:4 Snap-In Duplicator
1:4 HDD/SSD Duplicator Deluxe
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
User Guide
(HDUS4SNDX-A)
(HDUS4SNDX-A)
www.addonics.com
Advertisement
Related Manuals for Addonics Technologies HDUS4SNDX-A
Summary of Contents for Addonics Technologies HDUS4SNDX-A
- Page 1 T E C H N O L O G I E S User Guide 1:4 Snap-In Duplicator 1:4 HDD/SSD Duplicator Deluxe (HDUS4SNDX-A) (HDUS4SNDX-A) www.addonics.com Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:...
- Page 2 3. Source Drive 4. Target Drives 5. Drive Power & Activity LED HDUS4SNDX-A Installing drives into the 1:4 Snap-In Duplicator Step 1. Be sure the lock on each drive door is in an unlock position. If not, use the key that comes with the disk Array to unlock the drive door. Pull on the door lever to swing open the drive door all the way.
- Page 3 The Duplicator Panel There are four buttons and an LCD on the panel of HDD Duplicator. Duplicator Panel 1. LCD shows a function or a message. 2. Use to scroll up function menus. 3. Use to scroll down function menus. 4.
-
Page 4: Main Menu
Duplicator Functions The duplicator has three menu sections: The Main menu, Setup Options, and Advanced Setup Options. Setup Options is accessed through the Main menu. Advanced Setup Options is accessed by holding the ESC button from any other menu until the unit beeps. Main Menu 1. -
Page 5: Setup Options
9. Overwrite Overwrite is used to write data onto the entire hard disk, it will destroy all data on all HDDs connected to the duplicator (including Source HDD) by writing data to all sectors. There are 4 sub-options: One pass (zero), One pass (random), 3 pass and 7 pass. -
Page 6: Auto Start Drive
NOTE: Target drive size is still required to be equal to or greater than source. Only works with source drives formatted using Master Boot Record. If the source drive has a boot record other than MBR, the entire disk will be copied as if Fast Copy were OFF. If the source drive is formatted with a Master Boot Record and contains only FAT32 or NTFS partitions, identical partitions will be created on the target(s) and only the files will be copied. - Page 7 ing one partition with the firmware file in the root directory. NOTE: This function scans the entire disk before proceeding. Providing a drive that is as small as possible is strongly recommended. 11-03. Compare Firmware Used to confirm correct firmware. Connect a drive formatted as FAT contain- ing one partition with the firmware file in the root directory.