Setting Convection Convert; Setting Add 1 Minute Feature - Kenmore 970-3394 series Use & Care Manual

Setting Oven Controls
• Setting Convection Convert Feature
•

Setting Add 1 Minute Feature

To set the Convection Convert feature
The CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Bake, Timed Bake or a Delay Start (Delayed Timed Bake) setting. When
used with a Timed Bake or a Delay Start (Delayed Timed Bake) setting, the Convection Convert feature will display a "CF" for
check food when the bake time is 75% complete (See Fig. 4). At this time the oven control will sound 3 long beeps at regular
intervals until baking has finished. When the bake time has completely finished the control will display "End" and will sound
3 long beeps every 30 seconds until the
INSTRUCTIONS
Using Convection Convert (Bake) feature to
automatically adjust oven temperature (example
below when setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press , "- - - °" will appear in the display (Fig. 1).
3. Press
appear in the display (See Fig. 2). If a Timed Bake or a Delayed
Start (Delayed Timed Bake) is desired, enter the times now.
4. Press . "CONV BAKE" and the oven temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven temperature
is reached. The display will show "325°", "CONV BAKE" and
the fan icon (Fig. 3).
Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See rotating fan in Fig. 3).
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Timed Bake or a Delay Start (Delayed Timed
Bake) is 20 minutes.
To Set Add 1 Minute Feature
The ADD 1 MINUTE pad is used to set additional minutes to the Kitchen Timer. Each time the
pressed, another minute is added to the Kitchen Timer if the Kitchen Timer is already active. If the Kitchen Timer is not
active and the pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1
minute.
When the Kitchen Timer reaches the end of the set time, the timer will display "End" and signal 3 long beeps at regular
intervals until is pressed. If a Kitchen Timer function has ended pressing
For further information on how to set the Kitchen Timer feature see To Set the Kitchen Timer instructions.
pad is pressed (See Fig. 5).
. "BAKE" will flash and "350°" will
PRESS
will restart the timer at 1 minute.
28
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
pad is