Setting Convection Convert; Setting Add 1 Minute Feature - Kenmore 970-3395 Use & Care Manual

Setting Oven Controls
• Setting Convection Convert Feature
•

Setting Add 1 Minute Feature

To set the Convection Convert feature
The CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When
set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.
INSTRUCTIONS
Using Convection Convert feature to adjust oven
temperature from a Bake recipe (example below
when setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press , (See Fig. 1). If a Cook Time or a Delay Start
is desired, enter the times now.
3. Press . "CONV BAKE" and the oven set temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven set
temperature is reached. (See Fig. 2).
Notes: When used with a Cook Time or a Delay Start setting,
the Convection Convert feature will display a "CF" for check
food when the bake time is 75% complete (See Fig. 3). At this
time the oven control will sound 3 long beeps at regular intervals
until baking has finished. When the bake time has completely
finished the control will display "End" and will sound 3 long
beeps every 30 seconds until the
4).
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or a Delay Start function is
20 minutes.
To Set Add 1 Minute Feature
The keypad is used to set additional minutes to the Timer. Each time the
added. If the Timer is not active and the
counting down from 1 minute. When the Timer reaches the end of the set time, "End" will display and signal 3 long beeps
at regular intervals until
pad is pressed (See Fig.
key pad is pressed, the Timer feature will become active and will begin
is pressed again.
PRESS
28
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
pad is pressed, another minute is