Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenmore 790.7042 Series
Summary of Contents for Kenmore 790.7042 Series
- Page 1 Gas Range Use & Care Guide Estufa de gas Guía para el Uso y Cuidado Models, Modelos 790. 7042 , 7120 , 7121 , 7144 , 7145 , 7154 , 7155 = color number, número de color www.sears.com Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. p/n 316417326 (0704)
-
Page 2: Table Of Contents
Protection Agreements ............14 reference. Sears Service ............Back Cover Kenmore Appliance Warranty One Year Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free ®... -
Page 3: Important Safety Instructions
Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This symbol will help alert you to situations that may cause serious bodily harm, death or property damage. This symbol will help alert you to situations that may cause bodily injury or property damage. - Page 4 Important Safety Instructions • DO NOT TOUCH SURFACE BURNERS, AREAS NEAR THESE • Protective Liners—Do not use aluminum foil to line surface BURNERS, OVEN BURNERS OR INTERIOR SURFACES OF THE burner pans, or oven bottom, except as suggested in this manual. OVEN.
-
Page 5: Conversion To Liquified Petroleum Gas
Important Safety Instructions Grounding Instructions (electric ignition models only) Avoid fire hazard or electrical shock. Do not use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death. This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. -
Page 6: Setting Surface Controls
Setting Surface Controls Setting Surface Controls Do not place plastic Your range may be equipped with different sized surface burners. The ability to items such as salt and pepper shakers, heat food quicker and in larger volumes increases as the burner size increases. spoon holders or plastic wrappings on top of the range when it is in use. -
Page 7: Before Setting Oven Controls
Before Setting Oven Controls Oven Vent Location The oven vent is located below the backguard. When the oven is on, warm air is released through this vent. This venting is necessary for proper air circulation in the oven and good baking results. DO NOT BLOCK THE OVEN VENT. Arranging Oven Racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). -
Page 8: Setting Oven Controls
Setting Oven Controls Note: The time of day must first be set in order to operate the oven. To change the Temperature Display Mode to °C To Set the Clock (Celsius) or from °C to °F (do not use Bake or Broil while When the range is first plugged in, or when the power changing the Temperature Display Mode): supply to the range has been interrupted, the display will... -
Page 9: Setting Oven Controls
Setting Oven Controls (cont’d) To Broil: 1. Slide broiler drawer out to the stop position. 2. Remove broiler pan and insert (See Fig. 1). 3. Always postion rack before setting control, while range is cool. 4. Postion rack by tilting front of rack and pulling rack out from locating holes in rear of broiler drawer. -
Page 10: Adjusting Your Oven Temperature (Some Models)
Adjusting Your Oven Temperature (some models) Your new oven has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you feel your oven is too hot or too cool from your baking experience, the oven temperature may be adjusted to your liking. -
Page 11: Cleaning The Cooktop
General Care & Cleaning (cont’d) Cleaning Chart Surfaces How to Clean Glass, Painted For general cleaning, use a soft cloth, clean with mild dish detergent & water or a 50/50 solution Plastic Body Parts & of vinegar & water. Follow by rinsing the area with clean water; dry & polish with a soft cloth. Control Knobs Glass cleaners may be used if sprayed on a soft cloth 1st. - Page 12 General Care & Cleaning (cont’d) To Clean the Recessed and Contoured Areas of the Cooktop - If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry. To Remove and Replace the Surface Burner Caps and Surface Burner Heads - Remove in the following order: (1st) surface burner grate, (2nd) surface burner cap and (3rd) surface burner heads.
-
Page 13: Before You Make A Service Call
Before You Call Solutions to Common Problems Before you call for service, review the following list. It may save you time & expense. The list includes common occurrences (shown in bold) that are not the result of defective workmanship or materials in this appliance. The possible corrections to these problems are provided with the problem listed: Oven smokes excessively during broiling - (1) Control(s) not Range is not level - (1) Poor installation. -
Page 14: Protection Agreements
Lo felicitamos por haber hecho una compra inteligente. Su Kenmore ® product is designed and manufactured for years nuevo producto Kenmore ® fue diseñado y fabricado para of dependable operation. But like all products, it may require ofrecer muchos años de servicio confiable. Sin embargo, preventive maintenance or repair from time to time. - Page 15 Notes...