Coffee Preparation - Nespresso Breville Instruction Manual

COFFEE PREPARATION

11 Fill the water
tank with
potable water.
The machine selects the most frequently chosen cup size (based on last 11 coffees), Espresso as factory setting. You can change this by selecting any other control.
14 Completely open the slider and
insert a Nespresso capsule.
1
2
17 To manually top up your coffee, touch any
max. 4 sec
of the controls immediately from end of
preparation and touch lit control again to
stop. Max 4 seconds.
12 Place a cup under the coffee outlet. Turn machine ON
by either pushing the slider or touching the controls.
Light will blink on one of the coffee touch controls:
heating up for approximately 25 seconds. Steady
light: ready.
15
18
13
Ristretto 25 ml
Espresso 40 ml
Lungo 110 ml
Close the slider.
Preparation will stop automatically.
To change the selected cup size during brewing
select the new desired control. The machine will
immediately stop if the coffee volume extracted
is larger than new desired control.
Select the Ristretto control (25ml), Espresso (40 ml) or
Lungo (110 ml) based on the chosen Grand Cru recommended
cup size. You can select the desired coffee size even
when the machine is still heating up. The coffee will then flow
automatically when the machine is ready.
16
To stop the coffee flow touch
the lit control or move the slider
towards the back of the machine
until it stops.
19 To accommodate a milk recipe glass,
shift the cup support to either the left
or right side magnets. The capsule
will be automatically ejected.
EN
9