Nespresso Breville Instruction Manual page 11

Water hardness: Descale after:
3
36
18
11 Empty the drip tray and the
used capsule container.
14
Blinking light: heating up.
Steady light: ready
17
Refill the water tank with
the used descaling solution
collected in the container and
touch any control to repeat
the procedure.
Nespresso descaling kit: Ref. 3035/CBU-2
°fH French degree
°dH German degree
CaCO3 Calcium Carbonate
12 Fill the water tank with 1 unit of Nespresso
descaling liquid and add 0.5 L /17 oz of water.
0.5 L
15
To enter the descaling mode, at slider closed
3 sec
push all the 3 controls simultaneously for at
1
least 3 sec. A short beep will confirm it. Open
the slider.
2
18
Empty and rinse the water tank, capsule
container, drip tray and cup support
thoroughly. Fill water tank with potable
water. When ready, touch any control to
rinse the machine. Machine will stop
when done.
max.
13 Place a container (minimum volume: 0.6 L / 20 oz)
under the coffee outlet. Activate the machine by pushing
one of the cup selection touches.
16 Push all the 3 controls simultaneously for at least
3 sec
3sec. A short beep will confirm it. The control area
1
will start blinking quickly. Close the slider to start
descaling. Machine stops when water tank is empty.
2
19 To exit the descaling mode, push all the 3 controls
simultaneously for at least 3sec. A short beep will
confirm this. The machine is now ready for use.
EN
11