8
Select TCP in the Protocol drop down menu since these ports use TCP.
9
Enter a name for this rule, for example WOW1. Click Enable then click Apply. Your
new rule will appear in the table.
10
Repeat steps 7-9 for the next rule. In this case only one port is used, 3724. Enter
3724 in the Trigger Start/End Port and Target Start/End Port fields.
11
Repeat steps 7-9 for the remaining ports that need to be opened. When you are
complete the table should look like this:
If your online game does not work and you are sure that you entered the correct ports
on the port triggering page, check to see if you have a firewall running on your
computer that is preventing you from playing your online game. This firewall may be
either the built-in Windows firewall or may be part of a third party security package
you are using on your computer. You will need to allow access through these
firewalls to be able to play your online game.
43