Theft Deterrent System - Cadillac Escalade ESV Owner's Manual

$10araEscalade.fm Page 246 Wednesday, October 14, 2009 9:52 AM
Starting and Operating Instructions
To program an additional key:
1. Verify that the new key has
stamped on it.
2. Start the engine using the
previously programmed
master key.
If the engine does not start,
see your dealer for service.
3. Turn off the ignition and
remove the key.
. . . 246
4. Within five seconds of turning
off the ignition, insert the key
that you are programming
and turn it to ON.
Once the key is programmed,
the Security System Light will
turn off.
The key may be programmed
so quickly that you may not
even realize that the Security
System Light had turned on.
5. If additional keys are to be
programmed, repeat the
previous steps.
If all of your ignition keys are lost
or damaged, see your dealer or
a locksmith who can service
®
Pass-Key III Plus systems to make
and program a new key.
■ THEFT DETERRENT
SYSTEM (IF EQUIPPED)
To arm the system:
1. Open the door.
2. Lock the vehicle with the
remote keyless entry system or
the power door lock switch.
The security system light will
begin flashing to indicate that
the theft deterrent system is
arming.