Cadillac Escalade ESV Owner's Manual page 163

$10araEscalade.fm Page 163 Wednesday, October 14, 2009 9:52 AM
USING THE UNIVERSAL
TRANSMITTER
Briefly press and hold the desired
universal transmitter button.
An indicator light will come on
while a signal is being transmitted.
ERASING UNIVERSAL
TRANSMITTER BUTTONS
To erase all three programmed
buttons, press and hold the
two outside buttons for about
20 seconds, until the indicator
lights flash rapidly.
Release the buttons.
The codes from all three buttons
are now erased.
Section 1
REPROGRAMMING THE
UNIVERSAL TRANSMITTER
To match a previously
programmed button to a new
device, see "Programming the
Transmitter" earlier in this section.
163 . . .
–