Cadillac Escalade ESV Owner's Manual page 239

$10araEscalade.fm Page 239 Wednesday, October 14, 2009 9:52 AM
CAUTION
(Continued)
After installing a child restraint,
pull the shoulder belt all the
way out of the retractor to set
the lock (if equipped).
Secure any unused safety belts
behind the child restraint so
children cannot reach them.
NOTICE
Contact between the child
restraint's lower attachment
parts and the vehicle's safety
belt assembly may result in
damage.
If necessary, move the fastened
safety belt so that the belt
assembly and the lower attach-
ment parts do not rub together.
NOTICE
Folding an empty rear seat with
the safety belts secured may
cause damage to the safety belt
or the seat.
Always remember to return the
safety belts to their normal,
stowed position before folding
the rear seat.
Section 2
To secure a child restraint
designed for this system, use the
following procedure:
1. Locate the anchors where the
seatback meets the back of
the seat cushion.
2. Place the child restraint on the
seat.
3. Attach the child restraint's
attachment points to the
anchors in the vehicle, and
tighten as necessary. Follow
the instructions that come
with the restraint.
239 . . .
–
–