Cadillac Escalade ESV Owner's Manual page 161

$10araEscalade.fm Page 161 Wednesday, October 14, 2009 9:52 AM
6. Enter the switch positions.
Begin with switch 1.
Use the following information
to program the proper switch
position.
- If a switch is "left", press the
left button.
- If a switch is in the middle,
press the middle button.
- If a switch is "right", press the
right button.
Repeat this step for each
switch setting.
7. To exit programming mode,
simultaneously press and
release all three universal
transmitter buttons.
The indicator lights should
turn on.
8. Choose which of the three
buttons you want to program.
9. Press and hold the desired
universal transmitter button
until the device moves.
The indicator light should
begin to blink slowly.
It may take up to 55 seconds
before you see movement.
Section 1
10. Release the button when the
device moves.
The indicator light will blink
rapidly until programming is
complete.
11. Press and release the
programmed button.
The device should move to
confirm that programming is
successful.
If additional buttons are to be
programmed, repeat the previous
steps.
161 . . .
–