Setting Warmer Drawer Controls - Kenmore C970-44093 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Setting Warmer Drawer Controls

To Set the Warmer Drawer & Bread Proofing Controls:
1. Touch the
pad at the Warmer Drawer control position. The Warmer Drawer
indicator light will flash. Note: If no further pads are touched within 25 seconds
the request to power the Warmer Drawer ON will clear.
2. Set the desired power level. Touch
(see Figure 2) or
Warmer Drawer indicator light located above the ON/OFF pad will turn ON steady.
3. Each touch of the
levels from HI (see Figure 2) to MED (see Figure 3) to LO (see Figure 4) and to
the Proof bread feature (see Figure 5). If the Warmer Drawer is set at the LO
setting and the
light will be set (see Figure 5 and bread dough preparation instructions on this
page). To return to standard Warmer Drawer setting touch
Note: For best results, preheat the Warmer Drawer before adding the food or bread
dough. An empty drawer will preheat in approximately 15 minutes.
4. When the food is ready for removal, touch the
Drawer or Proof bread feature OFF. The Warmer Drawer indicator light will turn
OFF.
Preparing Bread Dough for the Warmer Drawer
The Warmer Drawer has a "Proof Bread" feature that can be used to help prepare
bread dough. The recommended length of time to keep bread dough in the Warmer
Drawer is about 45-60 minutes. Be sure however to follow the recipe's recommended
times.
The prepared bread dough should be placed in a large bowl since the dough will nearly
double in volume. Arrange the Warmer Drawer Rack in the downward position (see
Figure 6). Place the bowl on the rack in the Warmer Drawer and follow the Warmer
Drawer and Proof bread Control setting instructions at the top of this page.
Note: For best results, do not operate the main oven while using the Proof Bread
feature.
Note: The Warmer Drawer will NOT operate while in Self-Clean
and "Oven Lockout" modes.
once to turn ON the power level for HI
to turn ON the power level for LO (see Figure 4). The
or
pads will decrease or increase through 6 power
pad is touch again the Proof bread feature and indicator
pad at least once.
pad once to turn the Warmer
16
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents