Table of Contents
Advertisement
S86A
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Connections When Using an ELAN SPP System Precision Panel - Front
VIA!NET Connection
This RJ-45 connector is reserved for future use.
Figure 3-20: VIA!NET Connection (Future Use)
EXT IR Connections
The EXT IR connector is NOT used for S86A-based systems.
Figure 3-21: EXT IR Connection (Not Used)
Sense Input Connections
Information from ELAN™SENSE Sensors connected to the S86A's ELAN SENSE INPUTS is used to trigger events
that have been programmed into VIA! Touch Panels. Typically, sensors will connect to the back of the SPP precision
Panel, then 3.5mm stereo interconnect cables will be used between the Precision Panel's TO SENSE INPUTS jacks
and the S86A Controller's ELAN SENSE INPUTS jacks. Utilize VIA!TOOLS or ELANTOOLS Setup Software to create
IR or serial command strings for automated functions. See the VIA!TOOLS or ELANTOOLS Help file for additional
informationabout programming Sense Inputs.
S86A
Figure 3-22: Sense Input Connections
Page 36
© ELAN Home Systems 2009 • All rights reserved.
Hide quick links:
Advertisement
Table of Contents
