Elan s86a Installation Manual page 105

S86A
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
C: abcdefgh:
a = 0
b = WHM Status (0 = OFF, 1 = ON)
c = Page Trigger Status (0 = OFF, 1 = ON)
d = {DRC Status for S12 (0 = OFF, 1 = ON)} Always 0 for S86A
e = Loudness Status (0 = OFF, 1 = ON) {Always 0 for S12}
fgh = Source Selected (0 = Zone OFF, 1-6 = Source 7-12, 7 = Source < 6 see previous
byte)
D: abcdefgh:
a = 0
b = X usually 0, but could be 1
cdefgh = Volume Level(0 = Max, 48 = Min)
E: abcdefgh:
a = 0
b = X usually 0, but could be 1
c = X usually 0, but could be 1
defgh = Treble Level(28 = Max +dB, 4 = Min -dB)
F: abcdefgh:
a = 0
b = X usually 0, but could be 1
c = X usually 0, but could be 1
defgh = Bass Level(28 = Max +dB, 4 = Min -dB)
Examples:
• &S86,QRY,1?<cr> Queries chassis unit ID #1. Useful for third party UI.
• Given Zone 1 is ON with Source 2 playing at 50% volume level and flat EQ the reply for
that zone would look like this in HEX format:
0x26 0x53 0x38 0x36 0x2C 0x51 0x52 0x59 0x2C 0x31 0x2C 0x81 0x4A 0x07 0x18
0x10 0x10.
© ELAN Home Systems 2009 • All rights reserved. Page 103