Triggers Connections - Elan s86a Installation Manual

S86A
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL

Triggers Connections

There are 6 PROGRAMMABLE TRIGGER OUTPUTS on the S86A Controller. By default, these are zone-specific;
each becomes active when its corresponding zone becomes active. Use these when zone-specific functions are
desired; for example, use the PROGRAMMABLE TRIGGER OUTPUTS to mute/un-mute specific channels on an
A12 or D12 amplifier. These outputs can be programmed in VIA!TOOLS or ELANTOOLS Setup Software to become
active with IR orserial commands to create automated events. Use 3.5mm mono interconnect cables to connect the
S86A Controller's PROGRAMMABLE TRIGGER OUTPUTS to the SPP Precision Panel's TRIGGERS
connections. The TRIGGERS 7-8 on the SPP are unused in S86A systems.
S86A
PROGRAMMABLE TRIGGER OUTPUTS
1 2 3 4 5 6
Figure 3-25: Triggers Connection
Page 38 © ELAN Home Systems 2009 • All rights reserved.