Tiller Controls - Shoprider Traveso 889XLSBN/CAN User Manual

Tiller Controls

Speed Control:
This allows the user to set the maximum speed of the scooter between 1
(minimum) and 10 (maximum).
Battery Level Indicator:
The number of LED bars lit gives an indication to the amount of charge
remaining in the batteries. The amount of charge will only show it's true level
when the scooter is being driven. Do not allow the LED bars to go out
completely as complete discharge of the batteries could cause
permanent damage to your scooter.
High/Low Speed Switch:
This sets the maximum high speed for the scooter. This MUST be set to low
when used in pedestrian areas. The 'HIGH' setting should only be selected
when used on the road.
Hazard Lights:
This red button operates all of the indicators simultaneously.
Lights:
This blue button operates the main front and rear lights.
Key Switch:
The key switch operates the main power for the scooter. When turned
clockwise the battery level indicator should light up indicating that the scooter
is on. There is a small delay before the thumb lever controls operate as the
controller checks the main circuits. Do not turn off the power whist moving,
this will cause the scooter to stop abruptly.
6