Kingsman ZCV39N Installation Instructions Manual page 45

MQ39D Driftwood Log Set- 4pcs -
1
 Place Log 1 on left side of fireplace against the back wall of the firebox.
 Place Log 2 on the right side of fireplace against the back wall of the firebox as shown.
 Pull up Log Tabs on Burner. Match these with holes in bottom of logs 3 & 4.
 Place Logs 3 & 4 on the burner in the center of fireplace as shown. Do not place directly on burner ports.
 If sooting occurs change position of logs or remove affected objects.
MQROCK2, MQROCK3 -
MQRock2
Or
MQRock3
Lava Rock (Supplied with Base
Unit). Do not place on Burner.
 Place rocks randomly onto False Bottom and Burner. Do not place directly on burner ports.
 Not all rocks will be used on some installations.
 If sooting occurs change position of or remove affected objects.
Must be used with ZCV39GT/ ZCV42GT Glass Tray
3
Must be used with ZCV39GT/ ZCV42GT Glass Tray
 Pilot Area Must Not Be Covered, as delayed ignition can occur.
2
4
NOTE
NOTE
 Pilot Area Must
Not Be
Covered, as
delayed ignition
can occur.
Insulation Wool & MQ EMBER (shown,
supplied with Base Unit), or MQ Glass can
be placed on Burner.
MQ Stone (shown), MQ
Rock 2 or 3, or MQ Glass
can be placed on Glass Tray.
Lava Rock (supplied with Base Unit).
Do not place on Burner.
MQ EMBER (shown) can be
placed on Burner.
MQ Glass can be placed on
Burner and Glass Tray.
45