Adjusting Air Flow Direction - Toshiba RAV-SM562XT-E Owner's Manual

ADJUSTING AIR FLOW DIRECTION

• Adjust the air flow direction properly. Otherwise, it might cause
discomfort and make the room temperature uneven.
• Adjust the vertical air flow using the remote controller.
• Adjust the horizontal air flow manually.
Adjust the vertical air flow
The air conditioner automatically adjusts the vertical air flow direction
in accordance with the operating conditions when AUTO or A mode
is selected.
To set the air flow direction you desire
Perform this function when the air conditioner is in operation.
(1) FIX button
Keep pushing or pushing briefly the FIX button on the
remote controller to move the louver in the desired direction.
•
Change the vertical air flow louver direction within the range
indicated.
•
In subsequent operations, the vertical air flow is automatically
set in the direction to which you adjusted the louver using the
FIX button.
To automatically swing the air flow direction
Perform this function when the air conditioner is in operation.
(1) SWING button
Push the SWING button on the remote controller.
•
To stop the function, push the SWING button.
•
To change the swing direction, push the FIX button.
CAUTION
• The FIX and SWING buttons will be disabled when the air conditioner is
not in operation (including when the ON TIMER is set).
• Do not operate the air conditioner for long hours with the air flow
direction set downward during the cooling or dry operation. Otherwise,
condensation may occur on the surface of the vertical air flow louver and
cause dew dripping.
• Do not move the vertical air flow louver manually. Always use the FIX
button.
If you move the louver manually, it may malfunction during operation.
If the louver malfunctions, stop the air conditioner once, and restart.
• When the air conditioner is started immediately after it was stopped, the
vertical air flow louver might not move for 10 seconds or so.
Adjust the horizontal air flow
Preparation:
•
Take hold of the lever on the horizontal air flow louver and move
them to adjust the air flow direction as required.
•
You can adjust the air flow at the left, center, and right locations of
the grilles.
13
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
(1)
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK
PRESET
START/STOP
FAN MODE AUTO
(1)
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK